Teryx H2 BOUNCER Shift Gate
After seven years and thousands of miles riding the KRX and Teryx H2 platforms, we know how much a quick, clean shift matters. We’ve always used an H-pattern gate, but we designed this RCOR shift gate around the rough, technical, tight trails we ride most.
The custom shift pattern makes the moves simple: pull straight back from any position for Reverse, push forward and left for Low, or push forward and right for High. The shift opening is wide and smooth to help the shifter move without hanging up, and the gate is made from extremely durable material.
It’s quickly become one of our favorite parts, especially when a hill climb calls for a quick shift into Reverse.
 
RCOR Shift Gate Installation
Remove the center console cover.
Remove the four bolts securing the OEM shift gate, then lift out the gate.
Remove the metal collars from the OEM gate and transfer them to the RCOR gate. They will fit tightly; we use a small hammer to gently tap them into place.
Install the RCOR shift gate using the four original bolts, then reinstall the center console cover.
Check the shifter adjustment and confirm that each gear fully engages before driving.