Get rid of the ridiculous shift gate on your stock KRX 1000. This shift gate from AJ's will allow you to shift back and forth between gears much quicker and smoother. Go directly from high/low to reverse to keep yourself from rolling backwards when steep hill climbs go wrong. Made of plastic just like OEM so you dont have to worry about rattling against metal/aluminum or paint chipping off on your shifter arm. Guaranteed the smoothest shift gate around. 
 
Fits 2020-2021 KRX 1000 
 
Install Instructions:
1. REMOVE SHIFT KNOB
2. REMOVE PUSH PINS FROM FRONT PORTION OF CONSOLE AND 2 PHILLIPS SCREWS IN CUP HOLDERS
3. LIFT CONSOLE COVER UP AND REST IT ON THE SHIFT HANDLE
4. SPREAD THE RUBBER DUST SEAL FROM AROUND THE FACTORY GATE
5. (CARREFULLY) REMOVE BOLTS FROM SHIFT GATE AND CRUSH RINGS
!!!!!!!!!!!!! THEY ARE A LOOSE FIT IN THE FACTORY GATE !!!!!!!!!!!!!!!!
6. WITH A SMALL HAMMER FLIP OUR GATE UPSIDE DOWN AND REST IT ON A SQUARE EDGE BENCH TOP OR COUNTER TOP AND TAP IN THE FACTORY CRUSH RINGS INTO OUR GATE HOLES ( TIGHT FIT)
7. INSTALL OUR GATE WITH THE LONG SLOT ON THE DRIVER SIDE AND INTALL FACTORY BOLTS.
8. CLOSE EVERYTHING BACK UP AND INSTALL SHIFT KNOB